Skip to main content

Some Solutions to Fix Broken and Unreadable Hard drives


Fix Broken Hard drives

Some Solutions to Fix Broken and Unreadable Hard drives – A hard drive is essential hardware in a computer or laptop that functions as a data storage area. The data stored on the hard drive will not be lost even if the computer is turned off, so its function is increasingly important in terms of storing important data.

Along with continuous use, the hard drive can also be damaged and sometimes become illegible. This will be very annoying, especially if your necessary data is stored on the hard drive. The following article will discuss a damaged hard drive and how to fix it.


What Causes a Damaged Hard Drive?

Several things can cause a damaged hard drive, so it’s essential to know the cause before fixing it. Here are some of them.

1. Hard drive becomes too hot due to overuse.

When the hard drive is used excessively and continuously, it will overheat. When the hard disk temperature gets higher, the hard drive’s performance will decrease, and over time it will suffer damage.

Read:  How to Screen Mirror Smartphone to PC/Laptop With App or Without App

2. Too much software.

The hard drive functions as a data storage area, but that doesn’t mean you can fill it with too much software or software. Too often, installing the hard drive has to work too hard to damage its function over time.

3. Hard drives often stop working suddenly.

If you have a computer or laptop, make sure to always turn off the device according to the procedure. The reason is, if the computer is shut down forcibly or suddenly, then the hard drive will also die suddenly.

This will damage the hardware over time.

4. Exposed to a virus.

Viruses can also be one of the reasons why hard drives can be damaged. So, make sure you are always careful when surfing in cyberspace and when you want to download certain content. Pay attention to whether the page you visit is trusted or not.

Do not carelessly visit sites or download data as this can infect the hard drive with viruses that can damage it.

5. Exceeded the usage period.

Each piece of hardware has a length of time to use. The older it is, it means that the device is used more often, works more frequently, and over time it will slow down too. The same thing can happen to hard drives.

6. Forcibly removing the external hard drive.

Never remove the external hard drive forcibly, as this can corrupt the file. If you have this, often, the files on the hard drive will be damaged or unreadable.

Read:  How to Hide Apps on iPhone Without Uninstall


How to Repair a Damaged and Unreadable Hard Drive?

After discussing a few things that can damage a hard drive, now is the time to learn how to fix it. In some cases, a damaged hard drive may still be saved. For example, when the hardware is unreadable.

First, check whether the connecting cable or socket is still good or not. If it is loose, all you have to do is replace the socket or cable. However, if these two components are still functioning correctly, the next step is to determine the hard drive’s main problem.

1. Checking bad sectors.

One of the causes of damage to the hard disk is bad sectors. To be sure, search the computer by typing CMD. Next, find the command prompt text and right-click, then select Run as administrator.

Next, a command prompt page will appear on your computer or laptop screen. Type chkdsk / f e: then press enter. E here, you can change according to the location of the hard drive that is being repaired. This method will tell you if the hard drive is experiencing bad sector logic.

2. Reformat the hard drive.

When it is known that the cause is bad sector logic, you can reform the hard drive. You can do this using software called Low-Level Format.

If you have installed the software on your computer or laptop, then the next step is to install the hard drive that you will repair. Next, open the Low-Level Format software and select the hard drive to repair.

Read:  How to Make Google Forms Easily, Quickly on Mobile and PC

Next, click continue, then select Low-Level Format, and click Format This Device. This step will automatically reformat your hard drive. After the process is complete, you can repartition the hard drive.

Keep in mind that reformatting the hard drive will automatically erase all existing data on the hard drive. So, make sure that you don’t choose the wrong hard drive when doing this action.

If after reformatting is done but the hard drive remains unreadable, then there is a big possibility that the damage is in the physical part of the hardware. In case of physical damage, all that can be done is to bring it to a service point.

Repairing a hard drive is usually quite expensive, considering how to fix it is also not easy. If there is a lot of essential data that needs to be saved, it is best to leave the experts’ fix.

But if not, you can immediately format the hard drive yourself.

Thank you for visiting AllinGadget. We always try to provide the latest and best information for you. I hope you get the information you want. If you have criticism and feedback, please contact us via email at Have a nice day.